Air compressors are an important tool and equipment in the plumbing, automotive, and manufacturing industries. If you are looking for the best c-aire compressor for sale just because the older one is not working properly, we suggest you read this post.

Like any other machine, the plumbing air compressor can also get faulty over time, even if you have purchased it from a well-reputed company such as NASCO. 

There is no doubt that the products and equipment offered by NASCO are of high quality, but if you do not regularly maintain or service them, they’ll wear out.

Below, we will discuss the most common issues and their most viable solutions. Let us dig into the details!

Compressor Oil Leakage

A very common issue with air compressor tools is oil leakage. You must properly lubricate the compressor because if the oil levels are low or the sump runs dry, the air compressor end will get damaged, leading to costly repairs. 

You must check your air compressor for any leakage before using it. An oil leakage would show up as a pool under the compressor. The most common reasons behind this are worn seals & gaskets, loose fittings & connectors, damaged oil lines, and overfilling the sump.

To resolve this issue, you have to check all the seals, fittings, connectors, and parts of the oil system and identify any cracked or damaged parts. After inspection, you need to replace or repair faulty parts and change the oil. 

You should get the air compressor oil from the best plumber supply shop. Also, don’t forget to install a fresh oil filter when changing the oil. If you are buying plumbing equipment online, following all the instructions during oil change or part replacement is important.

Overheating of Compressor 

Air compressor overheating is another common issue that most plumbers would face. We have seen many people looking for a new c-aire compressor for sale because of this overheating issue. Well, you must know this issue can be resolved, but first, you must know its common causes. 

Various reasons, including lack of lubrication, poor ventilation, high environmental temperature, clogged filters, or a faulty cooling system, can cause air compressor overheating. 

To avoid the overheating problem, it is most important to operate it within its recommended duty cycle. If you are overstressing the equipment, it will simply burn out, and in such situations, it is best to have an automatic extinguisher installed to minimize loss. You can buy automatic extinguisher online from Nasco.

 You must ensure that the air compressor is properly cleaned regularly so that it doesn’t get heated because of clogged hoses. Also, be sure that the room in which you use the compressor is not too hot. Install a fan or an air conditioner if you feel it is necessary.

In addition, you must also check the cooling system of the air compressor and ensure that the water or coolant levels are up to the mark.

Unusual Noises or Getting Loud

If the noise of the air compressor is increasing, it is often considered an indicator of an underlying problem. In all plumbing fitting tools, the commercial air compressor can be the noisiest, but if you notice any change in the noise levels or hear any knocking, squealing, or grinding, there is a mechanical issue, or a component is failing.

The most common reasons behind these kinds of noises can be worn, loose, damaged belts, pulleys, bolts, or other parts. It can also be because improper mounting or placement of the compressor can result in excessive movement and increasing noise. In addition to this, bad motor bearings can also result in excessive or cranky noises. 

To resolve this issue, you must first check the compressor's moving parts. If you find any loose or damaged belts, bolts, or other components, you need to repair them or replace them. You must also lubricate all necessary parts to reduce friction and excessive squeaking noise.

If the issue persists, it is best to consult a professional technician or plumber supply shop for a new c-aire compressor for sale. 

Low Air Pressure

Low air pressure is another common issue in commercial air compressor machines. Many reasons, including leaks, clogged air filters, or a faulty pump, can cause low air pressure. 

You need to first check the compressor for leaks using a pressure gauge. You can also use soapy water to identify leaks in the body or pipes. Once you have identified the leaks, you must get those parts repaired/welded. 

Check the air filters to ensure they’re clean. You must know that a clogged air filter will restrict air flow, so cleaning filters regularly or replacing them over time is important. 

You also need to check the pump for wear and tear. If the pump is not working properly, you must purchase a new one from an air compressor shop and replace it. 

Excessive Power Consumption

You must know that commercial air compressor equipment can consume a lot of power. You must note their consumption and check if they are consuming any extra load. If you note this issue, it can simply indicate a problem affecting the compressor's efficiency. 

The most common reason behind this issue is that you have neglected regular maintenance, such as cleaning and lubrication. Excessive power consumption can also be caused by air leakage or by the machine operating at higher pressures than what is advised by the manufacturer. Also, a faulty or old compressor motor can consume more power.

To resolve this issue, it is important to change the oil regularly, clean/replace filters, and check & repair any leakages. You must also ensure the compressor is only operated at the advised pressure level. Also, if your compressor motor has become outdated, replace it instead of looking for a new c-aire compressor for sale. 

If the power consumption issue persists, you need to bring in a professional and let them check whether there is something wrong with the wiring. They would also suggest tips for reducing energy usage. 

End Words

If you own and run a commercial air compressor, you must know about the common issues that can arise and how you can avoid or resolve them. 

Regular maintenance and repairs can easily extend the lifespan of your air compressor and ensure it operates without any issues. If you encounter issues that you cannot resolve on your own, consulting with a professional technician is always a good idea to avoid further damage and ensure proper functioning.

If you have the skills but are looking for high-quality parts, you can easily get them from NASCO. Here, you will find the most qualitative and affordable plumbing-related equipment!